- For 19mm crank spindles and threaded Euro bottom bracket frames. - High-quality four bearing design with aluminum cups.
WeThePeople's Tripod Seatpost is made from strong, lightweight 6061 aluminum. The Tripod design is stronger and has more structural support than Pivotal seat/post combos. It uses a 3-point mounting system, where two rear supports press into channels underneath a Tripod seat, and a single bolt up front secures the system.
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 32mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
In addition to updating Aaron’s tire, Odyssey also wanted to update his signature grip. The updated “Boss” grip features a low profile block pattern which will match his tire, and comes in at 158mm. These will feel similar to his original grip, but improved and with all new styling.
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.
Mike Aitken's original signature seat size and shape.
$9.99 - $22.99
- Press fit designed to work the hub's non-drive side collar.
$13.99 - $24.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.
$89.99 - $99.99
The original 7000 series aluminum BMX rim. This specialty grade of aluminum lets Odyssey produce a rim that is both lightweight and strong. The Seven-KA is a proven, go-to rim for pro-level riders worldwide. SPECS - 7000 series aluminum - Width: 34mm - Height: 17mm ERD: 390mm
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher quality tube will always last longer than a cheap tube during comparable everyday use.
Mike Aitken's popular signature tires for street and dirt. Ideal for use at high speeds. - 20 × 2.25, and 20 x 2.45 Dual ply casing
Aaron’s signature tires feature an updated block tread and bigger sizing. The uniform block tread is reminiscent of his original tire, but freshened up. Coming in at 20x2.30" and 20x2.40"
The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?.
Odyssey Pursuit grips feature a wavy horizontal ribbing and other design cues to mimic how people usually wear their grips in. A textured section at the outer end allows for a very comfortable feel overall. The flat part of the grip takes its inspiration from Odyssey's popular Pursuit tire tread and the whole grip feels thin overall. - 155mm length. - Par Ends included.
$64.99 - $74.99
The Odyssey TL48 stem is made from 6061 Aluminum, has minimal branding and comes with a 48mm reach. The shorter 48mm reach is right in line with the needs of street riders today. Odyssey pre-load bolts sit flush with stem when mounted correctly. Simple and clean. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined SPECS - 48mm reach - 33mm rise or -1.5mm when flipped - 10.4 oz (294.8g)
The Sweepstakes bar is a big, comfortable bar that comes in at 29 inches wide and 9 inches tall. SPECS - 9-inch rise - 29-inch width - 10.5° backsweep - 4° upsweep - Multi-Butted41-Thermal processed 4130 chromoly - Weight 34.3 oz.
Tom Dugan’s signature grip features a timeless coil pattern, along with a feather design across the heavy wear areas. By using two molds you’ll notice feather angle symmetry once they’re installed. Par Ends included.
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 15mm dust cap. With 3mm, and 2mm spacers - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1 1/8-inch integrated headset. - 45º tapered bearings - 41.8mm outer diameter (fits 42mm BMX head tubes).
Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable.
Traditional chain pins are 3mm in diameter. The Key Chains are 5mm, and they are available with a hollow or solid pin assembly. These oversized pins are 4 times stronger than traditional pins, and the chances of bending one, whether the pin is hollow or solid, are essentially zero. The 5mm riveted pins provide added strength, but they also provide a bigger contact surface with the chain’s plates, which makes them harder to push out or bend. The hollow pin assembly, by design, allows for a stronger rivet connection to form during manufacturing, resulting in a stronger chain overall. Each plate has a low profile and an extra narrow waist that makes it harder to catch the plates at unwanted times. At 1.4mm, the plates are substantially thicker than the plates of any other chain, and they’re also more than 50% harder to bend than the thickest existing 1.2mm chain plates too. Users can break and re-join the chain with just a 3mm hex key. The chain’s half link plates are taller at the bends to both increase stiffness and minimize stretch. Since the use of a chain breaker to re-join the chain has been eliminated, the pins can retain their original level of tightness from the factory. Also, carrying a spare master link and 3mm allen key in most cases is enough to repair the Key Chain when riding, so lugging around a chain tool is usually unnecessary. By using material as efficiently as possible, Odyssey has strengthened every component of the chain and kept the weight in the same range as their Bluebird chain. Stretching of the chain is minimized by using a standard alternating plate pattern and limiting the chain to a single, beefed up half link. This configuration maximizes the lifespan of the sprocket and driver. - Width: 1/8-inch
Introducing the Odyssey Highway Bar. It’s the biggest bar Odyssey makes and features a traditional 7/8” crossbar tubing for superior strength and durability on taller bars. SPECS - 9.5-inch rise - 29” width - 12° backsweep - 1° upsweep - Multi-Butted - 41-Thermal® processed 4130 chromoly - Weight 35 oz.
WeThePeople's Feelin tire has a slick-tread design with a durable, grippy rubber compound, making it an awesome choice for the street and park.
WeThePeople's Grippin tire is an excellent all-around tire. With a semi-tread design and a durable, grippy rubber compound, this tire can rail dirt berms and vert ramps alike.
Compatible cable for M2 Monolever.
$18.99 - $24.99
- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included.
This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology. - Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated. - Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008. - Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables. - Gyro lug included at one end of the inner wire for use with detanglers. - 60-65mm in length.
The M2 lever works with a single cable or Odyssey’s patented dual cable system. The M2 cable system improves braking power for GYRO users. - Right hand only (works flipped on the left) - M2 specific upper cable and single cable coupler included.
Page 1 of 4 Next page