Filter By:

  • Show More Brands

  • Show Fewer Brands

Handlebars

Velo Orange Belleville Handlebar
$32.00
The Belleville is Velo Orange's reproduction of what is probably the most popular style of French city and utility bike bar ever. Anyone who enjoys classic European films has seen bars like this dozens of times. The Belleville is 430mm wide (or 450mm outside-to outside) and has zero rise. That's fairly narrow for a city bar, which is an advantage in traffic. Reach is about 180mm; the straight grip section is a generous 150mm. It has a 25.4mm clamp area and is rendered in aluminum alloy. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard inverse shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Velo Orange Crazy Handlebar
$60.00
Velo Orange's take on multi-hand-position handlebars, The Crazy Bar: half cruiser bar, half bull horns. Intended for touring, with multiple hand positions allowing the rider to move their hands around the bar during long stretches in the saddle. The main grip area is 22.2mm and fits mountain bike grips, flat bar brake levers and shifters. The bull horns are 23.8mm and fit bar end shifters or reverse brake levers. 25.4mm clamp area. Bull horns are 23.8mm so road levers/bar end shifters fit. Main bar is 22.2mm so MTB grips, levers and shifters fit. - Weight: 860g - Backsweep: 45° - Lever Compatability: Mountain 22.2mm and Road 23.8mm
Velo Orange Milan Handlebar
$35.00
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
Velo Orange Porteur Handlebar
$32.00 - $35.00
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Velo Orange Tourist Handlebar
$35.00
Velo Orange's Tourist bar is a "North Road" style bar rendered in polished aluminum alloy. It's similar to the bars used on many classic British roadsters. The clamp area is 25.4mm in diameter. The width is 570mm and the reach is 180mm; it has about 70mm of rise. They sweep back about 60-degrees, and the grip area is about 160mm long. The Tourist accepts regular MTB (22.2mm) grips, brakes, and shifters, but not inverse levers or bar-end shifters.
TruVativ Descendant 35mm DH Handlebar
$70.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°
TruVativ Descendant Carbon Flat Handlebar
$150.00
Uncompromising control and unflinching style. Based on the width of Enduro superstar Jerome Clementz, the Descendant carbon flat bars bring comfort and control to riders seeking the aggressive position a flat bar offers. Descendant series bars are the new benchmark for control and comfort. - Material: Carbon fiber - Width: 750mm - Backsweep: 7-degrees - Bar Clamp Diameter: 31.8mm - Colors: Black
TruVativ Descendant Carbon Riser Handlebar
$160.00
With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection
TruVativ Descendant Carbon Riser Handlebar
$150.00
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the Carbon Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Carbon fiber - Width: 750mm - Backsweep: 7 degrees - Bar Clamp Diameter: 31.8mm - Rise: 20mm - Upsweep: 5 degrees - Colors: Black
TruVativ Descendant CoLab Series Martin Soderstrom DH Riser Bar
$80.00
The Truvativ CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style - and to enhance each rider's cockpit interface. - Martin Soderstrom signature clean design with a reminder of his country’s colors and the dates and locations of his biggest crashes - Upsweep: 5 - Material: Aluminum
TruVativ Descendant Downhill Carbon Riser Handlebar
$180.00
With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection
TruVativ Descendant Downhill Riser Handlebar
$70.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
TruVativ Descendant Riser Handlebar
$65.00
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
TruVativ Descendant Troy Lee Design Handlebar
$100.00
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum
TruVativ Holzfeller Riserbar
$64.00
TruVativ's burly Holzfeller Riserbar is made from butted 7050 aluminum to take gravity-fueled abuse like a champ. This 730mm-wide bar gives you awesome leverage to muscle your rig and the rise gives you an upright position for greater control in nasty rock gardens as well as increased confidence on steep descents.
TruVativ Hussefelt Comp Riserbar
$39.99
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ Hussefelt Riserbar
$46.00
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ Noir T30 Flatbar
$156.00
TruVativ's Noir T30 Flatbar is made from TruVativ's unidirectional SL high-modulus carbon for ultra light weight and superb strength. Plus, the wide, flat profile of the bar puts you in an aggressive position perfect for short-travel bikes and it's bar-end compatible, too.
TruVativ Stylo T20 Flatbar
$21.00
TruVativ's Stylo T20 Flatbar is made from butted aluminum for low weight and high strength. At 600mm wide, it gives you a nice XC width without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
TruVativ Stylo T20 Riserbar
$30.00 - $39.99
TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
TruVativ Stylo T30 Riserbar
$46.00
TruVativ's Stylo T30 Riserbar will have you taking on climbs and descents like a champ. This butted aluminum bar is 700mm wide, to give you enough leverage to muscle your rig without weighing you down. And, the multiple rise options let you choose the perfect upright position for greater control in technical sections.
Thomson MTB Aluminum Downhill Handlebars
$109.95
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
Thomson MTB Carbon Cross Country Handlebar
$150.00
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Thomson Trail Handlebar
$110.00
Thomson's Trail bar is 750mm wide with 20mm of rise. The clamping area is 50mm wide, allowing a different bend profile for a more compliant ride. The Trail bar is designed to give you a lightweight aluminum all-around bar no matter your riding style. - Backsweep: 8° - Upsweep: 5° - Material: Aluminum
Surly Cheater Bar
$80.00
The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel. - Material: Cromoly steel - Clamp diameter: 31.8mm - Width: 780mm - Rise: 0mm - Sweep Angle: 11 degrees - Color: Clear Coat Silver and E.D. coated Black - Weight: 400g
Surly Moloko Bar
$95.00
If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so. - Material: CroMoly steel - Clamp diameter: 31.8mm - Width: 735mm; Cut marks for 685mm - Rise: 0 - Sweep Angle: 34 degrees - Weight: 709g - Color: E.D. coated Black
Surly Open Bar Handlebar
$50.00 - $60.00
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
Surly Sunrise Handlebars
$60.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black
Surly Terminal Handlebar
$75.00
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise
Sunlite Alloy Swedged MTB Handlebar
$15.99
• Lightweight aluminum construction • Back sweep: 6 degrees