Pedals

Sometimes you wear mountain bike shoes; sometimes you wear sneakers. MSW's CP-200 Platform and Clipless Pedals have you covered, whatever your footwear. These versatile pedals feature a wide, stable platform on one side and an SPD-style clipless entry on the other. Adjustable spring tension on the clipless side lets you customize how much pressure it takes to unclip, while sealed bearings keep you spinning smoothly for endless miles. And, the pedals are rebuildable to further maximize their lifespan.

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

- CNC aluminum body - Sealed bearing - Toe clip compatible - Reflectors included - 9/16-inch spindle

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 475g

You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair

- One-piece ABS resin body - Molded pins - 320g pair

The PEMBREE R1V elevates the platform pedal to a whole new level of performance and durability. The replaceable Traction Rails and Pins combined with the concave pedal body provide unrivaled grip and support for the rider. The SKF sealed ball and needle bearings will provide many years of maintenance-free riding and a dedicated spindle seal will keep even the worst of the winters out. All Traction Pins, bolts, and nuts as well as the spindle are stainless steel providing strength and corrosion resistance.

What if you could take control of gravity? Lean into the bend as far as possible without losing contact with the trail, or fly over doubles with ease? Designed alongside our top athletes to push the limits of grip and control, our TRAIL ROC PLUS flat pedals feature a wide, concave forged aluminum platform and high-resistance axles for perfect stability and unparalleled toughness. With 10 adjustable aluminum pins and a 16mm profile height, they keep you glued to your bike through curves, jumps and technical sections. Make every run a new challenge!

The GEO TREKKING VISION is the ultimate commuter pedal. Two different sides: one flat suitable for any shoes, and the other SPD-compatible for when you take things up a level. A removable light system adds that little extra security: ride to work in your suit and tie, ride home via the trails and side roads. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release Angle: 13° - Retention: 5-10 - Body: Composite - Traction: Composite studs - Spindle: Chromoly+ - Platform width: 84mm - Weight (pedal): 217g - Weight (pair + cleats): 490g - Light included: Yes (x2) - Light modes: 3 (steady/flash/flash eco) - Battery Life: Up to 30h (flash eco) - Light Output: 15 lumens - Battery: Micro USB rechargeable (cable included) - Charging time: 50 min - Beam angle: 180°

Simple, yet highly efficient. The GEO TREKKING PEDAL is LOOK's two-sided commuter option, allowing you to choose between a ride to work or a quick training session. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Composite - Traction: Composite studs - Spindle: Chromoly+ - Platform width: 84mm - Weight (pedal): 203g - Weight (pair + cleats): 461g

The X-TRACK RACE shares its design with the CARBON and Ti models, offering a composite body and Chromoly+ axle for optimal stiffness while riding. The SPD mechanism functions reliably even in the most extreme conditions, shedding mud and debris which may get caught under your shoes. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Composite - Spindle: Chromoly+ - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 182g - Weight (pair + cleats): 415g - Float angle: 6° - Release angle: 13°

The GEO TREKKING GRIP pedals are ideal for commuting. Featuring a one-sided SPD-compatible mechanism, with a flat surface elastomer grip on the other, safe for riding in any conditions. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Composite / Elastomer bi-injection - Traction: Elastomer bi-injection - Spindle: Chromoly+ - Platform width: 86mm - Weight (pedal): 228g - Weight (pair + cleats): 511g

Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other, with the added security of the VISION light system for when the ride turns dark. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Aluminum - Traction: 8 traction pins - Spindle: Chromoly+ - Platform width: 83mm - Weight (pedal): 247g - Weight (pair + cleats): 550g - Light included: Yes (x2) - Light modes: 3 (steady/flash/flash eco) - Battery Life: Up to 30h (flash eco) - Light Output: 15 lumens - Battery: Micro USB rechargeable (cable included) - Charging time: 50 min - Beam angle: 180°

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. FEATURES - 10 rear loading custom hexagonal removable pins per side for maximum grip - Ultra thin leading edge chamfered design to deflect off any obstacle - Fully sealed and serviceable design with built in bearing extractor - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 365g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Chromoly steel - Height: 8.3-12mm - Pin to Axle distance: 112mm - Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick - Body Material: 6061-T6 Aluminum COMPATIBILITY - Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks. - These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.

Size specific magnesium platform pedal provides optimal shoe/pedal interface. Details - Magnesium pedal body for weight reduction - Optimal surface area - Minimal body profile - 16mm thin - Concave pin profile & 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Serviceable, pedal refresh kit found here Specs - Adjustable pins: 10 per side - Body material: AM60B Magnesium Alloy - Endcap: T15 - Footprint: 114mm x 111mm - Inner bearing type: Igus Bearing - Max rider weight: No restriction - Outer bearing type: Double Cartridge Bearing - Shoe size: US 10-15 // EU 43-49 - Spindle material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 386g per pair

The Comp version of Ritchey's world-beating Paradigm pedal has been redesigned from the ground, up. New engagement system provides best-in-class entry and release and excellent mud-shedding characteristics. The revamped axle system offers even greater bearing life, and a wider body improves stability. - Body: cast alloy - Axle material: CroMo - Inner bearing: ball bearing - Outer bearing: ball bearing - Float: 4° - Distance crank-to-center: 52.5mm - Pedal stack height: 17.1mm - Sold as a pair - Cleats included - Weight: 331g

Ritchey's WCS XC pedals are built on a system with a fixed front claw providing best-in-class entry and release and excellent mud-shedding characteristics. The axle system has been revamped for even greater bearing life while achieving an even lower axle-cleat height than the previous design, and a wider body improves stability. The bushing, needle and cartridge bearing system promises long service life and excellent protection from the elements, and easy serviceability. - 9/16"

Black Kat pedals are built around a larger double sealed bearing sytem, With a larger platform, thinner body and over all lighter appeal, these pedals bring great value. By utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout and included an additional pin kit with every purchase. - Extruded and CNC Machined 6061 T6 Aluminum - 100mm x 100mm platform - Concave body - Fully Serviceable DU Bushing and Double Micro Sealed Bearing System - Intended Use: Downhill, FR/DJ, Enduro, All Mountain - Allen bolt style pins - Additional Allen Pin kit included

TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.

Forged alloy platform pedals with a hardened chromoly spindle. - Molded pins - Size: 9/16-inch

Speciale 8 is Time's enduro pedal directly inspired by the renowned Sepciale 12. This enduro pedal is composed of an aluminum body that's slightly more compact than its big sister. You'll appreciate its stable platform with 4 adjustable spikes for optimal grip even unclipped and the micro-adjustable clamping system that meets the demands of the most advanced bikers. The patented ATAC engagement system (TIME patent) allows for easy insertion and positive, predictable release, as well as self-cleaning design, even in the toughest conditions. The Speciale 8 is entirely assembled in France in Time's Nevers factory, thus exceeding the highest standards in terms of materials and production.

- Pedal Weight (pair): 460g - Cleat Weight (pair): 64g - Size: 85 x 94 x 14 mm - Body Material: Aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: Sealed bearings / IGUS bushings - Cleat System: X2 / X1/ X1F (HT exclusive system) - Pins: Replaceable grip pins

- Lightweight Die-Cast Aluminum Body - CNC-Machined Chromoly Axle - Smooth Rolling, Serviceable Sealed Bearing and Bushing System - SPD (SH-51) Compatible Cleats Included - Adjustable Tension with 4° Float

- High impact Resin multi-use body with integrated cage - Externally sealed ball bearing system - 100mm x 82mm platform - Weight: 316g pair (9/16")

- Pedal Weight (pair): 377g - Cleat Weight (pair): 64g - Size: 68 x 84 x 17 mm - Body Material: Aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: Sealed bearings / IGUS bushings - Cleat System: X1 / X2 (HT exclusive system) - Pins: replaceable SP7 (M4 x 6mm) pins

- Small platform aluminum body with 2-sided clipless mechanism - Diecast aluminum body with CNC machined CrMo spindle - Sealed bearing and DU bushing - Adjustable cleat tension - X1E 4 deg float cleats included (easy entry and release) - 73 x 94 x 17

- Premium reinforced nylon composite body - Dual sealed bearings and DU bushing - 8 replaceable pins per side - Platform dimensions: 100 x 105 x 18mm