Parts & Accessories

- Shim adds support to Presta stem used in a Schrader rim

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Vision's Presta Valve Extender simply screws onto your tire's built-in valve to make it long enough to protrude through your deep-section aero wheels (choose the right length to fit your rim depth). This ensures that you can keep your tires properly inflated. This lightweight and durable aluminum extender comes with a small tool (not shown) for an air-tight installation.

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.

The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.

These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

The VersaValve stem utilizes a large, sturdy base plate that can be fitted on different rims, by use of rubber grommets. The large base plate ensures a solid contact with the rim bed and the adaptable grommets guarantee an airtight fit on most rims for mountain, road or CX use. - Universal fit. One valve for all rim types - Replaceable grommets - Kit includes VersaValve stems, two types of grommet, extra valve cores and RVC tool

- CNC Machined from 6061 Aluminum. - Expanding silica plug fits most MTB, Gravel & Road Handlebars with a larger than 17mm inside diameter. - Supplied with 17mm, 19mm and 21mm silica plugs to fit different handlebar diameters - Screws into bars using a 4mm Allen key - Plugs and repairs multiple holes that won't seal with just sealant - Compatible with most open-end grips and drops bars with a 84mm straight section at the bar end. - Dimensions 89 x 27 x 27mm - Weight: 33g per side (excluding tire worms)

Tubeless Valve/Tape Kit - Includes Tape, 2 Universal Valves & 1 Valve Core Wrench

Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.

- Premium alloy presta valve caps in an array of colors

Whisky Parts Co. Tubeless Rim Tape.

Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.

A good pair of valves can make a big difference in the reliability and ease-of-use for any tubeless setup. Whisky's No. 7 Brass tubeless valves help ensure your tires are dialed for every ride. And, it's always a good call to keep an extra valve in a pocket or bag. - For use with Whisky tubeless rims and most others - 40mm length - Fits up to a 8mm valve hole - Removable valve core - Sold as a pair

No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves

The Air-Liner is a high-quality polymer insert that replaces a portion of the air volume in the tire. This trait, combined with the shape, provides a tunable system that enhances your ride performance. The Air-Liner sidesteps the traditional compromise of stability vs. grip and allows your tires to remain stable, grippy, and controlled, even at low pressures. The Air-Liner is designed using a round cross-section with channels on the top and bottom. The top channel provides room for the tunable air chamber that sits directly beneath the tire tread. Upon impact, the corner edges of the channel flex first. This allows the tread to remain flexible, which increases traction without sacrificing impact resistance. The bottom channel allows for easy fine-tuning of the air chamber and allows for full compatibility of all valve core styles. The round cross-section shape mimics the natural shape of the tire and supports a greater contact area within the sidewalls of the tire casing. Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Protection: Both wheel and tire are protected by the Air-Liner insert. By cushioning impacts from within the tire, your expensive rim remains protected while eliminating flats caused by rim-strike impacts. - Control: The Air-Liner insert replaces air volume in the tire. The reduced air volume allows the tire to compress and rebound in a more controlled manner compared to standard tubeless systems. - Performance: Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Durability: This highly durable polymer material has been tested to a projected life of 2000 hours under normal riding, or 1 full hour of run-flat downhill use under a typical rider. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Sold individually (single tire). Compatibility - Small: 1.9 – 2.25-inch wide tires - Medium: 2.25 – 2.5-inch wide tires - Large: 2.5 – 2.7-inch wide tires - X-Large: 2.7 – 4.0-inch wide tires

Vittoria introduces Universal Sealant, the new range of anti-puncture bike tire sealants designed for Road and MTB use. The formula of the sealant has been improved. Universal Sealant does not contain ammonia, repairs larger punctures (up to 7mm), acts faster, and is compatible with both Road and MTB tubeless tires and with any type of inner tube. It is easy to use thanks to its specific pour spout that allows the application of the sealant straight from the valve. Universal Sealant is the universal anti-puncture bike tire sealant.

- High performance, professional tubular glue that dries rapidly - Each tube is usually adequate for gluing two tubular tires - Law prohibits ORM-D materials from shipping by air

- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes

- Double-sided tubular tape for installing tubular tires with no mess or waiting - Special activated surface of gluing tape makes installation and centering of a tubular tire on a rim very fast and easy

Virtually Eliminates Flats Tannus Armour wraps around your tube. With up to 15mm of protection, sharp objects can't penetrate your inner tube. Never Stop Riding In the unlikely event you do get a flat tire, you can still ride for a limited period of time. More Than Flat Protection Tannus Armour's design also helps protect your rim on those big drops and hard hits. Better Handling Ride The Tannus Armour sidewalls help stabilize your tires on corners and cushion the ride for more comfort. - Easy installation - Reduce punctures risk - Protects your rims from impact and sharp object penetration - Sidewall protection - Ideal For E-bike and MTB

Armour Tubeless displaces the small impacts but also offers a spring-like rebound for a smooth yet playful ride. Flexible Wings Not just a big chunk of foam. Armour Tubeless wings flex with the tire and rim to provide more traction, stability, and protection. Easy to install Trail ready in 5-10 minutes. No compressor or complicated tools needed. Simple, frustration-free install! Shock Absorption With 20mm of rim protection, Armour Tubeless provides almost double the shock absorption from impacts. - Proven to be the insert of choice by Professional Racers, Red Bull Rampage Athletes, Dirt Jumpers, Enduro Racers, Weekend Warriors, and the like - Super easy installation process - Sidewall Stabilizing wings - Compatible with any standard Tubeless set up valves - Lightweight: only 150 grams

- Anodized alloy construction - Fits standard Schrader valves

Type: Patch Cement Size: Individual tube

- Plastic storage box - Contains 7 large patches cement, and scuffer

• Includes a plastic storage box, 6 patches, cement, and scuffer

- Easily plug a hole in a tubeless or tubeless converted tire - No need to remove the tire from the rim, simply plug, replace lost air and go - Includes: Insertion tool and (5) rope plugs

The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires