Accessories

Lezyne's Ex Caddy is an expandable wedge shaped caddy with a lower portion that unzips when more storage is needed. Labeled internal organizational pockets provide extra organization. A buckle system securely attaches the Caddy to the seatpost and seat rails. Durable woven nylon fabrics, water resistant zippers, reflective logos, and reflective tail light loop make this caddy ready for all weather and nighttime riding.

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Wald's medium size twin rear carrier basket is a durable way to carry heavier loads. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry 1-2 small grocery bags in each side basket with greater confidence and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - Dimensions: 6.5 x 13.5 x 10 inches; tapers to 4.5 x 11.5 inches at the bottom - Rack is 5" by 13" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 520 has a Zinc Plated Finish; 520GB has a Black Powder Coat Finish - Complete basket with fittings weighs 5.3 lbs.

You know those old movies where they show a woman coming from the market and she has a basket on cruiser with a baguette sticking out of it? Well, Sunlite's Deluxe Quick Release Rattan Basket is that basket. The nice thing is that you can easily take it off your bike and carry it in to the store with you. It attaches to any handlebars via a quick release mount. Its frame is made from steel with a weather-resistant synthetic rattan weave so it can handle a good bit of weight, too.

• For use in basement and garage • Saves space and protects tires • Fast and easy ceiling mounting • For ceiling heights up to 13` (4m) • Lifts weights up to 45lbs (20kg) • Clamp included

Topeak's Dual-Touch Bike Stand is a great way to display and store your prize two-wheelers whether you park it in your living room, the garage or the office. It's built of durable and attractive aluminum, is capable of holding up to 4 bicycles with additional bike mounts (2 bike mounts included) and features a quick-release height adjustment (the stand reaches up to 10.5 feet).

Optimize recovery, the vegan way. - 100% organic - Restores muscle glycogen - Rebuilds muscle strength - Reduces soreness & fatigue BENEFITS: Everything that makes Recoverite our best-selling product—formulated to fit a vegan diet! Just like the original, Vegan Recoverite offers a 3:1 ratio of complex carbohydrate to complete protein, specifically designed to jump-start the recovery process. This new formula’s plant-based protein will help you maximize your gains, regardless of dietary preferences. It tastes great, mixes easily, and includes the same ideal electrolyte profile and amino acid supplementation that Recoverite fans have relied on for years. Recovery matters. Do it right with Vegan Recoverite—the simple and effective solution for all! - Kosher Certification - Gluten-Free Certification

Carry just the necessities in Topeak's Large Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

The Minoura SBH-300 Saddle Water Bottle Cage Mount for 2 Cages attaches behind your saddle to hold two extra water bottle cages or one extra bottle cage and one spare tube set. It is lightweight at only 135 grams, and is in a good position for aerodynamics. All bottle cage screws are included. Not compatible with I-Beam type saddles, standard dual rail type only. - Behind-saddle mounted holder for two extra water bottle cages, or one bottle and one spare tube set - Good position for aerodynamics - Lightweight at 135 grams - Bottle cage mounting screws included - Not compatible with I-Beam type saddle. Standard dual rail type only

- Snap onto any Rx Micro multi-tool - Integrated quick link storage pockets - Levers snap together with bonus tool insert featuring integrated Presta Valve Core Tool, Valve Extender Wrench, and Storage Pocket for Shimano and Campagnolo master pins. - Pedro's proprietary plastic blend delivers impressive strength & performance in compact size. Pedro's new Micro Levers are born from award-winning DNA, fight well above their weight of just 20 grams, and pack a few extra tricks up their sleeve. Bring on the flat tires and trail-side repairs. Available in yellow, pink, green, orange, and black.

Engineered for day and night use, the Streak™ 450 packs an intense 450 lumens in a compact and lightweight design. Fire up the night with a selection of powerful brightness modes, and stand out in broad daylight with DayLightning® mode's blasts of lightning-like flashes. The Streak™ 450 enables you with high-performance lighting anytime, anywhere. - Powerful 450 lumen output with 7 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - DayLightning® - Walking) - SteadyPulse® mode alerts nighttime motorists with pulses while constantly lighting your path - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Rugged, water-resistant design only weighs 90 grams - Side illumination ports highlight your presence to nearby motorists - 2nd generation Locktite™ tool-free handlebar mount securely clamps to 22 to 32mm diameter handlebars RUN TIMES: - Low: 10 hrs - Medium: 3 hrs - High: 2 hrs - Boost: 1 hrs - SteadyPulse®: 3 hrs - DayLightning®: 10 hrs - Walking: 100 hrs - CHARGE TIME: 4 hrs - MOUNTING: Handlebar - BATTERY: Built-in Li-ion - SYSTEM WEIGHT: 90g *Features and specs are subject to change without notice.

We understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, and that's why we created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 100 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 100 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. Mako 250 - Low cost, high powered light - Highly visible in traffic = keeps you safe - Run Time: 7:00 – 28:00 hours - 3 light settings—High, Low, and Flash - Tough durable design - Water / Dust Resistant IP64 Rated CherryBomb 100 - Daylight Visible Flash (DVF) - Up to 136 hour run time - Visible up to 1 mile - Internal reflector = visible if light in off mode - Easy to operate AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - Water / Dust Resistant IP64 Rated

Finish Line® 1-Step™ is perfect for commuters and recreational cyclists seeking a quick and easy clean and lube solution. 1-Step™ loosens and removes surface grime, before leaving behind a clean, low-friction film of high-performance lubricant. 1-Step Cleaner & Lubricant helps prevent premature component wear, reduces pedaling friction, and eliminates drivetrain noise. It’s formulated with corrosion inhibitors that provide excellent rust protection in extreme conditions and coastal salt-air. 1-Step™ does not compromise on its ability to reduce pedaling friction over long intervals. • Fast and easy application • Cleans and lubricates chains in one simple step • Penetrates to flush out old lube and contaminants • Leaves behind a low-friction film of high-performance lubricant • Reduces friction, prevents chain wear, protects components • Can be applied to both clean or dirty bicycle chains • Provides maximum rust protection, even in salt-air • Ideal for commuters and cyclists on the go • Apply to bicycle chains before putting into storage

A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across

Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material

- For all TRP and Tektro hydraulic braking systems - Non-corrosive mineral oil - Increased Boiling point to 270 degrees C - Decreased viscosity for better fluid flow

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

- The Pro Seat is the ultimate child seat for MTB families. It’s lightning fast to attach and remove, is fully adjustable, and has zero frame contact. - Designed for children 2 – 5 years (up to 60lb / 27kg) - Super fast to fit, remove and swap between bikes - Fully adjustable with zero frame contact - Adjustable to fit electric and regular mountain bikes - Shotgun Pro bars are quick release for lightning-fast fitting and removal - Shotgun Pro Bars have pro 19mm grips, are 355mm wide, and are compatible with 31.8 and 35mm bars - Fits all bikes with standard 1-1/8 steerers (10mm clearance required)

- Organize, store and protect riding essentials all in one place - Waterprood Polyurethane case fits mini pumps, tools, tubes phones and money - Fits in a conventional watter bottle cage or jersey pocket

In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48 and 50t variants have fully integrated power into a direct mount aero chainring - 36-46t variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

- Bicycle Trailer Kit and Stroller Kit included. - Easy conversion from cycling to strolling. - Secure attachment to bike using Thule ezHitch axle mount - On-board storage of strolling wheel. - Comfortably seats two children - Adjustable handlebar—ergonomic, adjustable handlebar for maximum parent comfort - Compatible with a range of accessories - Easy folding for storage and transporting - Extra storage space for hauling around cargo - Meets international safety standards

The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Giant's Ratchet Multi Tool is like having a mobile workshop in your back pocket. Featuring 9 durable chrome vanadium bits and a storage case - faster than unfolding a conventional multi-tool when you have cold or wet hands and easier to reach hard to access bolts. Features - Type: Carry with - pocket or saddle bag tool - Material: Durable, chrome vanadium bits - Number of tools: 9 - Tools: Hex 2-10mm, PH2, T25/T15 - Extra: Case

Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant