Filter By:
- Parts & Accessories (131)
- Cranksets (237)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Cranksets
$39.99 - $66.19
$49.99 - $66.19
Up to 20% Off
- 8-speed Road crankset
- Square taper interface
- Does not include BB
- Bolt pattern: 110 x 5-bolt
- Crank length: 170mm
$17.99 - $26.99
• Square taper interface
• Only includes left crank
$21.99 - $36.99
• Square taper interface
• Only includes left crank
• 175mm length
$19.99 - $34.99
- Horizontal square interface
- Only includes left crank
$24.99
Fits 19mm team & talon cranks:
- Splines: 48
- Diameter 19mm
- Length: 5.5" (140mm)
- Spindle bolts: 3/8" X24tpi (not included)
- Also fits: Cult OS, Demolition Revolt, Rant 48-S, WTP Royal, Redline Device and other 19mm 48 spline cranks
$649.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace R9100 crank arm and is compatible with all Shimano Hollowtech II road drivetrains.
Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.
Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the data produced by our system.
Additional features:
- ± 1.5 % accuracy in all conditions
- Active temperature compensation
- Accelerometer based cadence measurement
- Wirelessly upgradable firmware
- LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
- Updated accelerometer and addition of gyroscope for improved cadence resolution
- Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength
Specifications
- Power meter housing: low profile design, with robust door interface
- Weight: Only adds 15g to base crank arm
- Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter
- Power range (Watts): 0 to 5000
- Cadence range (rpm): 10-220
- Water resistance rating: IPX7
In the box:
- Power Meter
- High quality CR2032 coin cell battery
- Lifetime access to Stages Link for power meter management and firmware upgrades.
- 2 months free access to Stages Link premium training and coaching features.
- Product Identification Card with Serial Number and ANT+ I.D. Number.
- User Guide
$26.99 - $54.99
The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain.
- Precision indexed shifting
- 8/7/6-speed compatible
- 3 crank length specification available
- Precise chain line control
- Light and reliable shifting
- Versatile performance
- Wide compatibility with multiple components
- Quick and precise assembly
$284.99 - $289.99
Shimano Ultegra R8000 crankset.
- Optimized lightweight crank arm design produces excellent power transfer efficiency
- Minimized weight without sacrificing stiffness
- Hollowtech II
- Rider tuned gear performance through various gear combinations
- Possible to choose the best choice for ride
- Redesigned FC for greater frame compatibility
- Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length
- Model Number : FC-R8000
- Series: Ultegra
- Crank Construction: Hollowtech II
- Crank Arm Length : 165, 170, 172.5, 175mm
- Bottom Bracket : SM-BBR60/SM-BBR60-PB
- Chain Line: 43.5
- Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)
$277.00 - $326.00
Forget front derailleurs; SRAM's Force 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. Force 1 combines the durability, simplicity and efficiency that SRAM is known for with their 1x mountain technology.
- Single-ring drivetrain simplifies functionality
- SRAM X-Sync: wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Chainrings available in 42, 50 (110 BCD), and 52 (130BCD) teeth to conquer every course from sand dunes to gravel-road assaults
- Unidirectional carbon crank arm matched to a forged aluminum spider for lightweight and durability
- Weight 679g-24mm, 172.5mm, 50T, no BB
- Bottom bracket not included
$410.00
The SRAM RED AXS Crank Arm Assembly features hollow carbon Exogram crank arms for a lightweight, strong, and elegant crank. It can be paired with any SRAM AXS spider or integrated chainring, with or without power.
- The 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings
- Not compatible with SRAM's 3-bolt direct mount interface
- Hollow Exogram carbon arms
- Spider and chainrings sold separately
- DUB spindle interface
- Compatible with all SRAM Road DUB bottom brackets
- Number of Chainrings: No Rings, No Spider Included
- Crank Intended Use: Road, Tri, Cyclocross
- Pedal Spindle: 9/16"
- Spindle Interface Type: SRAM DUB
- Chainring BCD: Direct Mount SRAM
- BB Included: No
$129.99 - $140.00
$130.00 - $140.00
On Sale
Elegant and secure direct-mount X-SYNC chainrings from the company that originated the 1x drivetrain for the ultimate in consistent chain control over the long haul.
- DUB bottom bracket adds durability and simplicity
- Wide-chainline crankset to fit the biggest gravel tires
- Longer DUB crank spindle accommodates both Road- and MTB-width bottom bracket standards for unmatched cross-compatibility across brands
- Compatible with 135mm, 142mm, and BOOST rear spacing
- BB not included
$137.00
Designed to handle whatever you can throw at it. Aluminum crankarms in a wide range of lengths and the DUB bottom bracket system mean the Rival crankset will keep spinning, no matter what. A tight and consistent 13-tooth gap between chainrings makes for accurate and dependable shifting.
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear
- Crisp and accurate front shifts
- DUB bottom bracket adds durability, simplicity, and virtually universal frame compatibility
- BB not included
$11.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.
Compatible with:
- Race Face
- Turbine Cinch
- Atlas Cinch
- Atlas (24mm Spindle)
- Turbine (24mm Spindle)
- Aeffect Cinch (175mm length ONLY)
- Most other popular alloy MTB cranks (except some alloy DH cranksets)
$11.99
Race Face Chain Retention System Parts
• For use with English threaded bottom bracket shells with no ISCG mount tabs
$40.99 - $199.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame
- Road sets include bearings, shields and a wavy washer
- Mountain sets include bearings, shields and a spacer
- Choose ceramic or stainless steel options
$95.00
- Solid forged crank arm
- Square interface
- Aluminum
- Speed: 10/11
- Chainline: 44mm
$449.99
- Cinch Direct Mount Technology for 1x
- Direct power transfer from stiff carbon fibre construction
- Built for Road, CX, Gravel, Tri, TT
- Chainline: 1x = 47mm, 2x = 45mm
- Weight: 442g (40t, 1x), 590g (2x)
- Q-Factor: 149mm
- Bottom bracket/spider sold seperately
- For 2x configurations, removeable spider required.
$59.99
Dimension Cyclocross Arm Sets made of 6061-T6 aluminum.
- Forged AL-6061-T6
- BB Not Included
- Chainrings Not Included
- 110/74 BCD
- Drivetrain Speeds: 10, 9, 8
- Number of Chainrings: Double
- Pedal Spindle: 9/16-inch
- Spindle interface Type: Square Taper JIS
- Weight: 590g
$39.99
- One-piece chromoly crankset
- 24TPI
- Length: 175mm
- Weight: 997g
$12.95
- Lower slider replacement parts for E-13 chainguides
$9.95
- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs
- Kits include chainline adjustment spacers
- 8/12mm button head bolts for single ring steel backplate guide applications
- 10/16mm flat head bolts for single ring alloy backplate guide applications
$17.95
- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets
$399.00
Unleash your Power with LG1 Carbon Cranks
World Cup proven for years, the Q Factor, overall profile, and volume of our Gen4 cranks have been greatly reduced, while strength and fatigue life has been dramatically improved. What wizardry is this? The engineers won't say, but the graphs and race results don't lie!
The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. The adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.
What's in the box: Cranks w/Self-Extractor, Installation Tools, Lockring, APS Adjuster, and Crank Boots
- The lightest, purpose-built carbon Enduro and Downhill crankset
- Built upon race-proven World Cup DH testing and results. Ultra-compacted carbon fiber arms are meticulously bonded to e*thirteen's Connect™ Polygon interface, which creates a robust, reliable, impact-resistant spindle-arm junction
- Adjustable chainline accommodates multiple rear-axle spacing configurations, meaning you can achieve either configuration by simply placing the spacers inboard or outboard of the chainring
- Carbon fiber downhill crank arms and aluminum spindle w/ Quick Connect™ lockring and Adaptive Preload Adjuster (APS), compatible with Quick Connect™ dual width Guidering M
- Includes crank arm protectors, crank arm, and chainring/BB removal tools
- 536g (34t M ring)
$399.00
e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed.
- Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings
- Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance
- Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation
- The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm)
- Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames)
- Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92
- Number of Chainrings: No Rings Included
- Crank Intended Use: Mountain
- Pedal Spindle: 9/16"
- Spindle Interface Type: e*Thirteen P3 Connect
- Drivetrain Speeds: 11, 12
- Chainring BCD: Direct Mount e*Thirteen
- BB Included: No
$399.00
Rise and Grind with our lightest cranks ever!
We applied decades of World Cup racing experience to develop our patented design for the lightest production carbon crankset we've ever made!
Lightweight, 30mm spindle, APS preload adjuster, and self-extractor bring the class-leading combo to your door.
- Lightest production crank on the market
- Gen4 cranks have the spindle on the non-drive side of the crank for easier chain guide setup and drivetrain maintenance
- Use a Boost chainring to fit non-Boost chainlines on this 68mm BB crank
- Now includes an 8mm self-extractor, meaning the cranks can be removed with nothing more than an 8mm allen key
- Carbon fiber crank arms and aluminum spindle w/ Quick Connect lockring and Adaptive Preload Adjuster (APS), compatible with all - Quick Connect guide rings
- 385g (73mm w/32T UL chainring), 398g (68mm w/38T UL chainring)
$399.00
The e*thirteen XCX Race crankset offers ultra-lightweight construction and uncompromising strength.
- Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings
- Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance
- Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92
- Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation
- Designed to be used with e*thirteen's ultra-lightweight UL Guidering (30-42t) for optimal weight savings
- Number of Chainrings: No Rings Included
- Chainline/Hub Compatibility: 135/142 MTB Hubs , 141/148 Boost Hubs
- Crank Intended Use: Mountain
- Pedal Spindle: 9/16"
- Spindle Interface Type: e*Thirteen P3 Connect
- Drivetrain Speeds: 11, 12
- Chainring BCD: Direct Mount e*Thirteen
- BB Included: No
$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings
- Set of 4
$21.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings
- Set of 5
$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings
- Set of 4
Page 1 of 13
Next page