Other

Zipp Speed Weaponry Cartridge Bearings - Will not work on Zipp 188 V9 rear hubs

Zipp Speed Weaponry Cartridge Bearings

The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details

The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details

Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the - chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule

Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black

Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-138 are 23mm apart, center-to-center. Do not confuse this hanger with Wheels Mfg DROPOUT-120.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

This Wheels Manufacturing Shim lets you mount a 1-1/8-inch clamp front derailleur on a 1-inch seat tube.

This Wheels Manufacturing Shimano/SRAM Single Speed Conversion Kit includes chain guides for carefree single speeding. Large chain guides sandwich the cog with diameters slightly larger than the cog to keep the chain from hopping off the rear cog. Includes: - (2) - 9mm chain guides - (6) - 3mm spacers - (2) - 1mm shims - (4) - 0.3mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any ½ x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain Note: Does not work acceptably with any 10 or 11-speed chain

Shimano & SRAM compatible single speed conversion kit; polished silver. Includes: - (7) - 4.5mm spacers - (2) - 1mm shims

If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.

• Aluminum clamp with a chromoly bolt

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

- DT Swiss cartridge bearings - Sold in pairs

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- Forged aluminum construction - Locking - Fits threadless fork steer tubes

• Aluminum • CNC-finished

• Aluminum clamp • Built-in rear rack mount

• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish

- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.