Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
$51.82 - $64.99
- 6061-T12 aluminum with round, Compact bend and a shallow drop - easy to reach brake lever positioning - Drop: 130mm - Reach: 75mm
This classic touring handlebar is great for bicycle restorations or for adding a touch of traditional class to any bike - 1"(25.4mm) clamp, 2.5" rise, 23.75" wide - Handmade in Maysville, Kentucky
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 726g - Lever Compatibility: Mountain 22.2mm
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 862g - Lever Compatibility: Mountain 22.2mm
If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so. - Material: CroMoly steel - Clamp diameter: 31.8mm - Width: 735mm; Cut marks for 685mm - Rise: 0 - Sweep Angle: 34 degrees - Weight: 709g - Color: E.D. coated Black
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
- Inspired by old Italian Cafe Racers and clubman bars, adds interest to any bike - CrMo-plated Tange steel - Clamp diamater: 25.4mm - Rise: 5 deg - Width: 22.8" (579mm) - Up/back sweep: 15 deg
$81.88 - $83.98
- Extra wide 6061 aluminum with tons of sweep - Forward offset to negate the sweep's stem shortening effect - Sweep: 15 degrees
The Sparrow is a touring/townie bar. - The 495mm version is more agile for squeezing through traffic than other townie/MTB bars. - The 520mm is still narrow, but with a grip area that fits levers and shifters. - The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. - Can be used flipped to be used as a riser bar or down for a less upright position. - Shotpeened Tange Aluminum - 25.4 mm clamp diameter - 50mm drop/rise - 55° backsweep - 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers. - Weight 245g (495mm)
- Shallow drop aluminum urban pursuit/track bar - 260g: all Nitto bars are measured center to center - 38cm width - 26mm clamp - 28mm drop
Super tough, straight gauge, 100% 4130 chromoly handlebars. The deeply knurled clamping area prevents your bars from slipping, so you can keep shredding! Product Specifications - Material: 4130 Chromoly - Width: 29.5" - Backsweep: 12° - Upsweep: 1° - Weight: 34.4oz
$39.99 - $49.99
The Crosshair bars are super tough, made from straight gauge 4130 chromoly tubing and available in multiple heights. Deep knurling at the clamping area prevents the bars from slipping, and the four-piece design sports a really classic look. Product Specifications - Material: 4130 Chromoly - Width: 29.5" - Backsweep: 12° - Upsweep: 1° - Weight: 39.1oz
Dan Coller's signature Contender bars are perfect for taller riders, coming in at a comfortable 9.75" rise. The Contender bars are the first set of bars from Kink to offer pre-defined cutting grooves at 0.25" intervals. Coming with a stock 29.5" width, they can easily be cut down to 29", 28.5", 28" or 27.5" without breaking out the tape measure. Made from 13-butted chromoly tubing, and our TruTherm post-weld heat treatment process ensures these bars can stand up to all kinds of riding. Being ridden and trusted by Dan Coller daily attests to the Contender bars' strength. TECH SPECS - Rise: 9.75-inches - Width: 29.5-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: 13-Butted 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 28.6oz
The Eagle bars are our first ever set of 4-piece bars! Available in multiple heights to fit your preference, all Eagle bars maintain the same width and comfortable sweeps. Made from straight gauge 4130 chromoly steel tubing, combine with our TruTherm post-weld heat treatment process, these bars can take a beating. The dimensions and bends used on the Eagle bars give the classic 4-piece design a modern and updated look. TECH SPECS - Rise: 9-inches and 9.5-inches - Width: 29.5-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: Straight Gauge 4130 Chromoly Steel - Heat Treatment: TruTherm Post Weld Heat Treated - Weight: 37.7oz (9") / 38.5oz (9.5")
With a 10" rise and 30" width, the Hulk bars are big, plain, and simple. Like all Kink handlebars, the Hulk bars use only the best 4130 chromoly steel material and our TruTherm post-weld heat treatment process to ensure maximum strength. The 13-butted tubing design means the bars are thicker in the bends, which adds strength where bars need it most. TECH SPECS - Rise: 10-inches - Width: 30-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: 13-Butted 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 29.2oz
Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm
Page 1 of 1