Other

The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers

SWITCH. A QUICK-CHANGE DIRECT MOUNT CHAINRING SYSTEM FROM ONEUP COMPONENTS. Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler. - Cheaper Replacement Cost - Replacement rings are a fraction of the cost of a complete direct mount chainring - Quick Change - Replace your ring in less than an minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding - Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain - 4 Ring Sizes (28, 30, 32, 34T) - 2 Profiles - both Round and Oval - 12 speed ring designed to work with both Shimano Hypergilde+ 12 speed chains and SRAM Eagle 12 speed chains. - Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire - 3 Offsets - Regular, Boost and Super Boost - Quick Change Rings can be replaced in less than a minute with only a 4mm allen key, without removing your crank. Simply loosen the bolts 2 turns, unlock the ring by rotating it by 20 degrees and pull it over and off your crank. Reverse these steps to install your new ring. If you plan to ride a trail that you know is steeper than your local trails, you can switch to a smaller ring in the parking lot, in less time than it takes your friend to put on his riding shoes! SPECS - Material: 7075-T6 - Weight: 66g (30T Boost Oval) Chainline: - 6mm offset - 49mm GXP/BB30 Long Spindle - 3mm offset - 52mm (Boost) GXP/BB30 Long Spindle - 0mm/SB - 49mm BB30 Short spindle, 56mm GXP/BB30 Long Spindle Compatibility: SRAM DM cranks; 9, 10, 11 and 12 Speed Chains

Eliminate dropped chains forever with the new OneUp Components Guide. As the trend for lower and slacker bikes continues, 'Little bikes' are getting more and more capable everyday. Revised for 2019 the OneUp Guide uses simple, one tool installation and adjustment as well as an all new tool less flip At only 40g the OneUp Chain Guide weighs less than a sip of water. WHY DO I NEED A GUIDE AND A NARROW WIDE CHAINRING? NW rings are awesome, but they're not perfect and every once in a while you can drop a chain while riding. On a social ride this means getting dropped by your friends. But when racing an Enduro a dropped chain can cost you the podium, which is why almost every EWS pro runs both a chainguide and narrow wide chainring. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment (4mm hex) - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 40g - Capacity: 26-38T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES - CHAIN GUIDE - ISCG05 - V2 - BASH GUIDE - ISCG05 - V2 - E-BIKE - STEPS/EP8 - Kit includes 1 two piece top guide

V2 dropper remote clamp for 22.2mm handlebar.

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit. Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders. - 210mm Dropper Post - adjustable down to 190mm - 180mm Dropper Post - adjustable down to 160mm - 150mm Dropper Post - adjustable down to 130mm - 120mm Dropper Post - adjustable down to 100mm

Eliminate dropped chains forever with the new OneUp Components Bash Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there. NOT JUST FOR ENDURO RACERS. The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention. The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 90g 28-30T, 105g 32-34T, 110g 36T - Capacity: 28-36T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic

Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with Shimano I-Spec EV (M9100, M8100, M7100) brake mounts. - Does not contain remote body.

North Shore Billet Derailleur Hangers - All hangers are CNC machined from 6061 T6 Aluminum for strength and stiffness beyond OEM hangers - Protective anodized pewter finish - Hardware not included

North Shore Billet Derailleur Hangers - All hangers are CNC machined from 6061 T6 Aluminum for strength and stiffness beyond OEM hangers - Protective anodized pewter finish - Hardware not included

North Shore Billet Derailleur Hangers - All hangers are CNC machined from 6061 T6 Aluminum for strength and stiffness beyond OEM hangers - Protective anodized pewter finish - Hardware not included

North Shore Billet Derailleur Hangers - All hangers are CNC machined from 6061 T6 Aluminum for strength and stiffness beyond OEM hangers - Protective anodized pewter finish - Hardware not included

The Ohlins RXF 36 Coil Fork Spring sets a new benchmark for spring rate accuracy and light weight for trail and all-mountain fork springs. - Ultra-fine spring rates to ensure perfect set up for all weights. - Spring rates are broken down to 0.9 N/mm (5 lbs./in). - Fits Ohlins RXF Coil fork only.

The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).

The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).

Replacement frame parts and hinge clamps for Ritchey Break-Away frames. - 34.9mm compatible with Ti-Carbon Road - Titanium Cross (all years) - Steel Break-Away frames (2012 and newer) - 31.8mm compatible with Steel Road and CX Break-Away bikes prior to 2012 models - 41.5mm compatible with Break-Away Carbon Road frame - 45.0mm compatible with Break-Away Tandem

Fork crown race for genuine Ritchey headsets. - For cartridge type headsets with a 45° taper - Alloy - ZS44/30

Featuring a tasteful TR logo, this top cap perfectly matches the graphics on all new Ritchey WCS stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits 1-1/8" stems - Weight: 8g

Featuring a tasteful High Polish Silver finish with laser printed logo, this top cap perfectly matches the graphics on Classic stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits with 1-1/8" stems - Weight: 8g

Saddle Rail Clamp outer-pieces to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS 1-Bolt alloy seatpost - Material: 7050 alloy

One of the original design goals of the Ritchey WCS KITE dropper post was that it be as simple and as efficient as possible. In addition to being an outstanding mountain bike dropper enjoyed by riders around the world, it's deceptively simple, incredibly reliable, and able to be serviced at home. The genuine Ritchey KITE Service Kit includes all of the parts you'll need to overhaul your KITE. Included in the KITE Service Kit: - Top cap rod seal double lips - Top cap O-ring - Top cap wiper seal - Top bushing - Bottom bushing - Preload O-ring - Release shaft - Circlip - Bottom bumper O-ring - Bottom cap O-ring - Release shaft seal - Bearing ball - Upper bumper O-ring - Service Instructional Video

Securely mounts a Di2 battery inside a Ritchey seatpost (Di2 battery not included)

Designed for legacy Shimano STI shifting systems, the Ritchey Cable Barrel Adjuster allows you to dial in your shifting with ease and precision. - Cable Tension Barrel Adjusters - STI compatible - Adjust the cable tension for optimal STI shifting

For additional stiffness, this replacement axle kit converts all Ritchey thru-axle gravel and cyclocross forks to 15mm thru-axle. The kit consists of the alloy 15 x 1.5mm thread thru-axle and replacement dropout inserts for the fork. - Axle: M15 x P 1.5mm x 120mm length - Inserts: M15 x P 1.5mm - Insert bolts included - Material: Alloy

This top cap perfectly matches the graphics on all new Ritchey Comp stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits with 1-1/8" stems - Weight: 8g

Designed specifically for the Ritchey WCS Carbon Fork, this compression device secures the stem and headset for any fork with a carbon steerer. - Compression plug for carbon 1-1/8" steerers - Top cap fits 1-1/8" stems

Upgrade your Ritchey C-220 and Toyon stems with these lightweight titanium bolts. - Titanium bolts - 4 pcs M5 / p0.8mm / 16mm length - 2 pcs M5 / p0.8mm / 18mm length

Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

Shimano XT RD-M786-GS Rear Derailleur Inner Cage Plate - "B" fit for XTR RD-M986-GS, Deore RD-M615-GS, RD-M610-GS - OEM inner cage plate for XT RD-M786-GS, SLX RD-M675-GS