Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$714.00
Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings.
All components are optimized for low friction and prolonged lifetime.
This wheel kit is compatible with 1st generation non-disc Zipp NSW (before mid-2018).
In The Box
- 4 x 61803 bearings
- 1 x 61903 bearing
- 1 x 61804 bearing
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet
$406.00
This is a set of replacement internals for Alfine SG-S700 11-Speed internally geared hubs, allowing you to reuse your old Alfine shell with brand new internals, making it like a new hub.
- 187mm axle width
$390.00
- Kits include Freehub body with CeramicSpeed bearings pre-installed for easy installation onto the wheel
- Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
$390.00
- Lowest resistance hybrid ceramic (ceramic balls and steel cages) available
- Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
- Kits include Freehub body with CeramicSpeed
$344.00
Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell and all driveshell internals for a plug-and-play swap.
Micro Spline Driveshell Instructions
- Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX
- Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.
$223.00
- Hub Cognition V2 Axial Clutch Kit
- Disc brake/rim brake
- Includes: ratchet shell & driver, sylomer spring assembly & seal cap)
$220.00
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$220.00
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$220.00
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$206.00
Zipp Speed Weaponry Rear Axle Conversion Kit
- Not to be used on 188 V6 or earlier rear hubs
- Only to be used to convert Zipp's 188 V7 10-speed rear hubs to 11-speed
$194.00
Wheel Freehub Kit SRAM XDR for Super 9RB
- Compatible only with the Super 9
- Compatible With: WH-SP9-CCR-A1
$165.00
Rear Hub Driveshell Conversion with Twin bearings for easy repair or replacement.
- Designed to fit MTN hubs
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable
$150.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions
$141.00
- Hub axle, rear
- Zipp Cognition V2 Disc Brake NSW w/Bearings (2 x 61903)
$141.00
- Hub Axle, rear
- Zipp Cognition V2 Rim Brake NSW w/Bearings (2 x 61903)
$136.00
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation.
The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included.
- 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center
- Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels
- Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels
- Includes cassette spacer
- Material: Aluminum
$130.00
Stan's original Neo hub has evolved to be stronger and more reliable than ever. The additional stress of larger cassette cogs, more capable bikes, and even more challenging trails led to the creation of the Neo with Speedsync.
This CNC machined Speedsync freehub is a direct replacement for your Neo hub and includes pawls, springs, pawl retaining ring, and 2 red freehub spacers. Bearings are pre-installed.
Note:
- Singlespeed freehub cannot be used to convert a hub originally set up with a Shimano or Sram XD freehub to SS. This freehub is only to be used with Stan's Neo SS hubs.
- OneUp freehub WILL NOT WORK with a SRAM cassette or Shimano cassette without a One Up Shark Cluster.
$129.99
- 6 pawl/48 point/7.5° engagement
- Cassette bodies for Elite Series RD-1110 hubs
- Sealed bearings
- Supplier Part: RD-1110
- Use: XDR
- Material: AL7075
- Bearing Type: Sealed
- Compatibility: RD1110
$129.99
Replacement Alloy HGR (HG-Road) Freehub Body, with Anti-Bite Technology, for all HEX Rear Hubs. Includes spacer ring to also allow the use of MTB cassettes.
Compatible with:
- All HEX J-Type, Straightpull, and Gravel rear wheels
Not compatible with:
- SPIKE/OOZY/SPOON hubs
$129.99
Replacement Alloy XDR (XD-Road) Freehub Body, for all HEX Rear Hubs. Includes spacer ring to also allow the use of MTB cassettes.
Compatible with:
- All HEX J-Type, Straightpull, and Gravel rear wheels
Not compatible with:
- SPIKE/OOZY/SPOON hubs
$129.99
Replacement Alloy Freehub Body, with Anti-Bite Technology, for all HEX Rear Hubs. Includes spacer ring to also allow the use of MTB cassettes.
Compatible with:
- All HEX J-Type, Straightpull, and Gravel rear wheels
Not compatible with:
- SPIKE/OOZY/SPOON hubs
$129.99
Replacement Freehub body for OOZY Trail R142/135, SPIKE R135/142, or SPIKE DH R150/157 Rear hubs. Compatible with all OOZY hubs and wheels. Compatible only with SPIKE and SPOON wheels (135mm and 150mm) produced in 2016 or later (with SPIKE hubs).
$119.99
- 6 pawl/54 point/6.6-degree engagement
- Cassette bodies for Elite Series CX/GX/MT/FB-1110 hubs
- Sealed bearings
$115.50
125 piece assortment of precision machined axle spacers (0.5mm to 5mm thickness). - Outside Diameter of Spacers: 16mm - Inside Diameter of Spacers: 10mm Kit includes: - (10) - 0.5mm thick spacers - (30) - 1mm thick spacers - (30) - 2mm thick spacers - (25) - 3mm thick spacers - (15) - 4mm thick spacers - (15) - 5mm thick spacers
$108.00
Wheel Freehub Kit—(Includes Bearings & Pawls) 11/12 Speed XD—X0 HUBS/RISE 60 (B1)/ROAM 30/ROAM 40/RAIL 40/RISE XX/ROAM 50/60 (B1)
Compatible With:
HU-X0-A1, WH-RAIL-40-A1, WH-RISE-60-B1, WH-RISE-XX-A1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-B1
$108.00
Wheel Freehub Kit SS 176/177 SRAM XDR
- End Caps Not Included
Compatible With:
WH-202-CCR-A1, WH-202-TLD-A1, WH-202-TUD-A1, WH-302-CCD-A1, WH-302-CCR-A1, WH-302-TLR-A1, WH-303-CCR-B1, WH-303-TLD-A1, WH-303-TUD-B1, WH-303-TUR-B1, WH-30C-CLD-A1, WH-30C-CLR-A1, WH-404-CCR-A1, WH-404-CCR-B1, WH-404-TLD-A1, WH-808-CCR-B1, WH-808-TLD-A1, WH-SP9-CC30-A1, WH-SP9-CCD-A1, WH-SP9-CCR-A1, WH-SP9-TUD-A1
$108.00
Wheel Freehub Kit—XD Driver Body Kit—ZM1 3Zero
- Compatible With: WH-MOTO-30-A1
$106.00
Wheel Freehub Kit—XD Driver Body Kit—Zipp ZM2
- Compatible With: WH-MOTO-30-B1
$100.00
- Freehub Body: Campagnolo N3W
- Freehub Compatibility: ENVE
- Speed: 13
$100.00
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$100.00
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$100.00
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$99.99
Replacement freehub bodies for Easton X5 hubs.
- Material: Aluminum
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain
$99.99
Replacement freehub bodies for Easton X5 hubs.
- Material: Aluminum
- Cassette Body Type: SRAM XD 11/12 Speed
$99.99
Replacement freehub body for Race Face Turbine and Aeffect wheels.
$81.80 - $99.60
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
- End Cap Included
$54.00 - $98.00
Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp.
- Sold in pairs
- Stainless steel: 85 grams/set
- Titanium: 78 grams/set
$95.50
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
$95.00
Replacement freehub bodies for Vault hubs.
- Use to replace worn/damaged freehub body or to switch cassette standards.
- 60T
$92.40
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$89.99
- 6 pawl/48 point/7.5-degree engagement
- Cassette bodies for Elite Series RD-1110 hubs
- Sealed bearings
- Material: AL7075
$83.33
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$83.20
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
- End Cap Sold Separately
$42.00 - $83.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
- The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry.
- No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
$80.90
Maximum stiffness and highest safety—the RWS Quick Release for road and MTB.
Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.
$80.90
Maximum stiffness and highest safety—the RWS Quick Release for road and MTB.
Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.
$80.90
Maximum stiffness and highest safety—the RWS quick release for road and MTB.
Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.
$79.99
Replacement Freehub body for I9 Hydra, I9 1/1, and Crankbrothers Hubs
- Shimano MS/Synthesis Base Alloy Driver
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
$79.00
- Original equipment freehub bodies to fit SRAM hubs and wheels.
- Includes Drive Side Axle End Cap
$78.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle.
This axle replaces the R.A.T. axle found on all Cervelo R.A.T.-equipped bikes. In addition to this axle, we include our replacement derailleur hanger with traditional threads. This axle, combined with the replacement derailleur hanger, will provide a complete, threaded thru-axle system. Our derailleur hanger matches the geometry and construction of the stock derailleur hanger in every way for crisp shifting performance.
- This axle is designed specifically to replace a rear R.A.T. axle on a Cervelo bike with included derailleur hanger.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. Our axle weighs 36 grams. Our axle and hanger weigh a combined 54 grams. Front and rear, our axle system saves a combined 58 grams relative to stock parts.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
$77.00
- Original equipment freehub bodies to fit SRAM hubs and wheels.
- Includes Right Axle End Cap
$69.99 - $73.99
- Grade 3 balls and magnetite rust proof finish
- Abec 5 precision and silicone w seals
- 3 times cryogenic race treatment
- Bearings sold individually, not as pair
Page 1 of 8
Next page